15 Best RC Pinion Gears for 2026

15 Best RC Pinion Gears for 2026
The best RC pinion gear for 2026 depends on your motor shaft, spur-gear pitch, and driving goals. You’ll find choices here for Mod 1, 48P, and 32P setups, including hardened-steel sets in several tooth counts.
Match the bore to your shaft and the pitch to your spur before buying; tooth count affects speed, torque, and motor load. Check spur material and temperatures, too. Compare the picks below to find a gear that fits your setup.
| Surpass Hobby Mod 1 Pinion Gear 5mm Bore | ![]() | Best 5mm Fit | Gear Type: Mod 1 pinion gear set | Tooth Counts: 18T–22T | Shaft Fit: 5 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| MakerDoIt RC Brushless Motor Pinion Gears 3.175mm Shaft | ![]() | Best Mid-Range Gearing | Gear Type: 48P pinion gear set | Tooth Counts: 19T–23T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| MakerDoIt 48P Pinion Gear Set 3.175mm 48 Pitch 24T 25T 26T 27T 28T RC Parts | ![]() | Best High-Tooth Options | Gear Type: 48P pinion gear set | Tooth Counts: 24T–28T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| 5-Pack Steel RC Motor Pinion Gear Set (13T–17T) | ![]() | Best 32P Set | Gear Type: 32P steel pinion gear set | Tooth Counts: 13T–17T | Shaft Fit: 5 mm motor shaft | VIEW LATEST PRICE | Read Our Analysis |
| OGRC 3.175mm 32P Pinion Gears 10T 11T 12T 13T 14T for Traxxas 1/10 RC Car | ![]() | Best Low-Gear Tuning | Gear Type: 32P pinion gear set | Tooth Counts: 10T–14T | Shaft Fit: 3.175 mm motor shaft | VIEW LATEST PRICE | Read Our Analysis |
| Hardened Steel RC Pinion Gear Set 3.175mm Shaft | ![]() | Best 48P Starter Set | Gear Type: 48P pinion gear set | Tooth Counts: 13T–17T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| ShareGoo Steel Pinion Gear Set 5-Pack 13T–17T | ![]() | Best Compact Set | Gear Type: 48P steel pinion gear set | Tooth Counts: 13T–17T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| 5-Piece 48P Pinion Gear Set for 1/10 RC Cars | ![]() | Best Balanced Range | Gear Type: 48P pinion gear set | Tooth Counts: 17T–21T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| Pothyes 0.5M Steel Pinion Gear for RC Cars | ![]() | Best Micro RC Pick | Gear Type: 0.5M pinion gear set | Tooth Counts: 14T–18T | Shaft Fit: 2 mm motor shaft | VIEW LATEST PRICE | Read Our Analysis |
| Flylin 5-Piece 48DP Pinion Gear Set RC Motor Gears for Climbing Cars | ![]() | Best 5mm 48P Set | Gear Type: 48DP pinion gear set | Tooth Counts: 20T, 22T, 24T, 26T, 28T | Shaft Fit: 5 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| AIMROCK 5-Pack RC Motor Pinion Gears (22T–26T) | ![]() | Best Steel Spur Match | Gear Type: 48P pinion gear set | Tooth Counts: 22T–26T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| 0.8M Pinion Gears Hardened Steel 3.175mm Bore 10T 11T 12T for 1/10 RC Motor | ![]() | Best 0.8M Set | Gear Type: 0.8M pinion gear set | Tooth Counts: 10T–12T | Shaft Fit: 3.175 mm bore | VIEW LATEST PRICE | Read Our Analysis |
| 32P Hardened Pinion Gear Set with Hex Key (12T–16T) | ![]() | Best 32P Versatility | Gear Type: 32P pinion gear set | Tooth Counts: 12T–16T | Shaft Fit: 1/8-inch shaft hole | VIEW LATEST PRICE | Read Our Analysis |
| OGRC 48DP 19T 20T 21T 22T 23T Pinion Gear 3.175(1/8-Inch) Pinion Motor Gear | ![]() | Best Mid-High Range | Gear Type: 48P pinion gear set | Tooth Counts: 19T–23T | Shaft Fit: 3.175 mm motor shaft | VIEW LATEST PRICE | Read Our Analysis |
| Hardened Steel RC Pinion Gear Set (13T–16T) | ![]() | Best 5mm Durability | Gear Type: RC pinion gear set | Tooth Counts: 13T–16T | Shaft Fit: 5 mm motor shaft | VIEW LATEST PRICE | Read Our Analysis |
More Details on Our Top Picks
Surpass Hobby Mod 1 Pinion Gear 5mm Bore
For 1/10- and 1/8-scale RC owners, Surpass Hobby’s Mod 1 pinions fit 5mm motor shafts. You can choose 18, 19, 20, 21, or 22-tooth options, then pair your selection with a spur gear of matching pitch for proper meshing. Durable metal construction supports long-lasting use, while the 5mm bore suits motors with 5mm shafts. The gears fit many 1/10- and 1/8-scale cars, monster trucks, and buggies from Arrma, HPI, Kyosho, Losi, Axial, Traxxas, Tamiya, and Associated.
Each pinion includes a screw, and the set comes with a screwdriver, so you have the basic tool for installation. Check your vehicle’s specifications before buying to confirm compatibility and maintain a reliable gear setup on your RC.
- Gear Type:Mod 1 pinion gear set
- Tooth Counts:18T–22T
- Shaft Fit:5 mm bore
- Pitch Match:Match pinion and spur gear pitch; Mod 1
- Material:Durable metal
- RC Applications:1/8- and 1/10-scale cars, trucks, and buggies
- Additional Feature:Individual mounting screw
- Additional Feature:Screwdriver included
- Additional Feature:Multiple gearing options
MakerDoIt RC Brushless Motor Pinion Gears 3.175mm Shaft
MakerDoIt’s 48P set suits drivers seeking versatile mid-range gearing, with five tooth counts for tuning to track conditions.
This set includes 19T, 20T, 21T, 22T, and 23T pinions for 1/10 RC brushless motors. The durable metal gears have a black finish, and each includes a set screw; the package also supplies a screwdriver.
Before installation, confirm your motor shaft measures 3.175 mm and your spur gear uses 48P pitch. Matching pitch helps the teeth mesh correctly, while the five sizes let you change the gear ratio to suit different track conditions.
If you need a practical range of gearing, this set offers several options without buying pinions separately. Adjust ratios as your needs change.
- Gear Type:48P pinion gear set
- Tooth Counts:19T–23T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Durable metal
- RC Applications:1/10-scale RC brushless motors
- Additional Feature:Black finish
- Additional Feature:Set screws included
- Additional Feature:Track-condition tuning
MakerDoIt 48P Pinion Gear Set 3.175mm 48 Pitch 24T 25T 26T 27T 28T RC Parts
With five 24T to 28T choices, this MakerDoIt set stands out among high-tooth options for RC drivers seeking gearing flexibility. You get five hardened-steel pinions, from 24T through 28T, in a compact black finish designed for repeated use. Each uses 48P gearing and a 3.175 mm bore, so check your spur pitch and motor-shaft diameter before installation. Set screws and a hex key are included, helping you swap ratios without sourcing extra hardware.
Start with the smallest pinion, then step up if you need more speed; monitor ESC and motor temperatures to avoid overheating or damage during longer or harder runs.
- Gear Type:48P pinion gear set
- Tooth Counts:24T–28T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:RC vehicles
- Additional Feature:Hex key included
- Additional Feature:Reusable design
- Additional Feature:Monitor motor temperatures
5-Pack Steel RC Motor Pinion Gear Set (13T–17T)
YijiaLink’s five-piece steel set is a go-to 32-pitch choice for RC builders who want gearing flexibility. The YJ-2023-006 kit includes black, hardened-steel pinions in 13T, 14T, 15T, 16T, and 17T sizes, giving you options to tune acceleration and top speed. Its reusable construction suits 1/8- and 1/10-scale cars, trucks, buggies, and monster trucks with 5 mm motor shafts.
You can use it with models from HPI, Kyosho, Losi, Axial, Tamiya, Arrma, Traxxas, HSP, and Redcat. Before installing, check your shaft diameter and match the pinion’s 32DP pitch to your spur gear for proper meshing. That gives you five useful ratios.
- Gear Type:32P steel pinion gear set
- Tooth Counts:13T–17T
- Shaft Fit:5 mm motor shaft
- Pitch Match:Match pinion and spur gear pitch; 32P
- Material:Hardened steel
- RC Applications:1/8- and 1/10-scale cars, trucks, and buggies
- Additional Feature:Five-piece set
- Additional Feature:Black finish
- Additional Feature:0.8 module equivalent
OGRC 3.175mm 32P Pinion Gears 10T 11T 12T 13T 14T for Traxxas 1/10 RC Car
For low-gear tuning, OGRC’s 32P pinion set suits drivers who want precise gearing changes on 1/10 RC cars. You get five options—10T, 11T, 12T, 13T, and 14T—so you can adjust your setup for speed or torque. Hardened steel construction helps the gears resist wear during regular use.
Each pinion fits a 3.175 mm motor shaft, supporting secure installation and efficient power transfer. You can use them with 550, 540, 3650, and similar motors in compatible cars, trucks, and off-road models. The package includes five M4 set screws and a 2 mm hex wrench for installation.
- Gear Type:32P pinion gear set
- Tooth Counts:10T–14T
- Shaft Fit:3.175 mm motor shaft
- Pitch Match:Match pinion and spur gear pitch; 32P
- Material:Hardened steel
- RC Applications:RC cars, trucks, and off-road models
- Additional Feature:Five M4 screws
- Additional Feature:2mm hex wrench
- Additional Feature:550/540 motor compatible
Hardened Steel RC Pinion Gear Set 3.175mm Shaft
This hardened-steel 48P five-pack makes a practical starter set for 1/10-scale RC drivers tuning their gearing. You get 13T, 14T, 15T, 16T, and 17T pinions, so you can adjust your ratio to suit different track conditions. Each gear fits a 3.175 mm (1/8-inch) motor shaft and includes a set screw; a hex key comes with the set for installation.
Before fitting one, confirm your motor-shaft diameter and spur-gear pitch. The gears suit 1/10-scale cars, monster trucks, and buggies from brands including Arrma, HPI, Kyosho, Losi, Axial, Traxxas, Tamiya, and Associated. MakerDoIt supplies the five-piece set.
- Gear Type:48P pinion gear set
- Tooth Counts:13T–17T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:1/10-scale cars, trucks, and buggies
- Additional Feature:Set screw per gear
- Additional Feature:Hex key included
- Additional Feature:Five-piece set
ShareGoo’s compact five-gear set suits 1/10 RC owners who want several 48P ratios in one kit. You get 13T, 14T, 15T, 16T, and 17T hardened steel pinions, letting you adjust gearing for your car, truck, or buggy. Each gear has a 3.175 mm (1/8-inch) bore and 9 mm height, and the reusable design suits motors with matching shafts.
The set fits many Arrma, HPI, Kyosho, Losi, Axial, Traxxas, Tamiya, and Associated vehicles. Grub screws come included for installation. Before fitting a gear, confirm your motor-shaft diameter and match its 48-pitch teeth to your spur gear for proper mesh.
- Gear Type:48P steel pinion gear set
- Tooth Counts:13T–17T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:1/10-scale cars, trucks, and buggies
- Additional Feature:9mm gear height
- Additional Feature:Grub screws included
- Additional Feature:Reusable design
5-Piece 48P Pinion Gear Set for 1/10 RC Cars
The Surpass Hobby USA 48P pinion set suits 1/10-scale drivers seeking a well-balanced range of gearing options. You get five hardened steel gears, from 17T to 21T, so you can tune your setup without buying pinions individually. CNC machining supports wear resistance through repeated use.
Each gear has a 48P pitch and a 3.175 mm bore for compatible motor shafts. Before installation, make sure your spur gear also uses 48P teeth; mismatched pitches won’t mesh properly. Secure your chosen pinion with a grub screw using the included hardened hex key. The set fits compatible 1/10-scale models from Traxxas, Arrma, HSP, HPI, AXIAL, Tamiya, and Losi.
- Gear Type:48P pinion gear set
- Tooth Counts:17T–21T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:1/10-scale RC cars
- Additional Feature:CNC-machined gears
- Additional Feature:Hardened hex key
- Additional Feature:Grub screws included
Pothyes 0.5M Steel Pinion Gear for RC Cars
For micro RC drivers seeking a durable gearing upgrade, Pothyes’ 0.5M steel pinion set offers five tooth options.
You can choose 14T, 15T, 16T, 17T, or 18T to tune your setup. Hardened steel gives the gears durable, reusable construction for repeated runs. The set fits 1/24 and 1/28 RC cars, trucks, buggies, crawlers, drift cars, and monster trucks, including select LOSI and Axial models. Before buying, check that your motor has a 2 mm shaft, then match the pinion’s 0.5M pitch with your spur gear. Proper pitch and shaft fit help you avoid poor tooth engagement and potential installation problems.
- Gear Type:0.5M pinion gear set
- Tooth Counts:14T–18T
- Shaft Fit:2 mm motor shaft
- Pitch Match:Match pinion and spur gear pitch; 0.5M
- Material:Hardened steel
- RC Applications:1/24- and 1/28-scale cars, trucks, and other models
- Additional Feature:1/24–1/28 scale
- Additional Feature:Crawler and drift use
- Additional Feature:Reusable construction
Flylin 5-Piece 48DP Pinion Gear Set RC Motor Gears for Climbing Cars
Flylin’s five-gear 5mm 48DP set suits 1/10-scale RC climbers who want to fine-tune gearing for different terrain. You get five tooth options, 20T through 28T, so you can adjust the gear ratio for track conditions. Each hardened 45-steel pinion resists wear, deformation, and damage during use.
The set includes 20T, 22T, 24T, 26T, and 28T gears, plus five M4 × 4mm set screws. Their 5mm bores fit compatible brushed or brushless motor shafts on 1/10-scale cars. Match them with a 48DP spur gear to achieve tooth mesh. You can use these pinions as replacements or gearing choices for climbing runs.
- Gear Type:48DP pinion gear set
- Tooth Counts:20T, 22T, 24T, 26T, 28T
- Shaft Fit:5 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48DP
- Material:Hardened 45-steel
- RC Applications:1/10-scale RC cars, including climbing vehicles
- Additional Feature:Five gear lengths
- Additional Feature:M4 × 4mm screws
- Additional Feature:Climbing car use
AIMROCK 5-Pack RC Motor Pinion Gears (22T–26T)
AIMROCK’s 48P set suits RC owners pairing hardened pinions with steel spur gears and wanting five tooth options. You get 22T, 23T, 24T, 25T, and 26T gears, so you can choose a ratio to suit your setup. The hardened steel construction is intended for use with steel spur gears; plastic or aluminum spurs may be damaged.
Before installation, confirm your spur gear is 48-pitch, since mismatched pitches won’t mesh. Each pinion has a 3.175 mm (1/8-inch) bore for motors with matching shafts in RC cars, boats, or planes. The package includes five grub screws and a steel hex key.
- Gear Type:48P pinion gear set
- Tooth Counts:22T–26T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:RC cars, boats, and planes
- Additional Feature:Steel spur gears only
- Additional Feature:Steel hex key
- Additional Feature:For boats and planes
0.8M Pinion Gears Hardened Steel 3.175mm Bore 10T 11T 12T for 1/10 RC Motor
If you need a versatile 0.8M set, Fraizoe’s hardened-steel pinions give 1/10 RC drivers three gearing options. The set includes 10T, 11T, and 12T gears with a 3.175mm bore, so you can match them to compatible brushed or brushless motors. Its 0.8M pitch fits popular Tamiya, Traxxas, Arrma, Axial, Losi, and HPI models.
Each precision-machined pinion uses 45# hardened steel for smooth power transfer. Choose a tooth count to tune your gearing toward speed or torque; the design helps reduce noise and vibration. You’ll get mounting screws and a hardened hex key, helping you secure the gear and maintain alignment.
- Gear Type:0.8M pinion gear set
- Tooth Counts:10T–12T
- Shaft Fit:3.175 mm bore
- Pitch Match:Match pinion and spur gear pitch; 0.8M
- Material:Hardened steel
- RC Applications:1/10-scale RC cars
- Additional Feature:Three-gear set
- Additional Feature:Reduced noise and vibration
- Additional Feature:Mounting screws included
32P Hardened Pinion Gear Set with Hex Key (12T–16T)
For RC drivers who fine-tune speed, this 32P set offers versatile gearing. You get five hardened metal pinions, ranging from 12T to 16T, so you can adjust your gear ratio and speed in small steps. Precision machining helps them run smoothly and quietly.
Before installation, confirm your spur gear uses 32P/32DP or compatible 0.8M pitch; matching pitches guarantee proper tooth engagement. The gears have a 1/8-inch shaft hole, so check motor-shaft fit before buying. MakerDoIt includes a hardened hex key for setup. If your drivetrain matches, this black set gives you options without purchasing each tooth count separately.
- Gear Type:32P pinion gear set
- Tooth Counts:12T–16T
- Shaft Fit:1/8-inch shaft hole
- Pitch Match:Match pinion and spur gear pitch; 32P
- Material:Hardened metal
- RC Applications:RC vehicles
- Additional Feature:Black finish
- Additional Feature:Hardened hex key
- Additional Feature:Precision-machined for quiet operation
OGRC 48DP 19T 20T 21T 22T 23T Pinion Gear 3.175(1/8-Inch) Pinion Motor Gear
OGRC’s mid-to-high-range 48DP set suits 1/10-scale drivers who want five gearing choices and hardened-steel durability, so you’ll have flexibility to tune for speed or torque.
The set includes 19T, 20T, 21T, 22T, and 23T pinions, letting you adjust the ratio for your setup and driving priorities. Each hardened-steel gear fits a motor shaft measuring 3.175 mm (1/8 inch), helping you achieve a secure fit and efficient power transfer. Use them in compatible 1/10-scale cars, trucks, or off-road models. You’ll also get five M3 set screws and a hex wrench for installation. Confirm fit and gearing limits before installation carefully.
- Gear Type:48P pinion gear set
- Tooth Counts:19T–23T
- Shaft Fit:3.175 mm motor shaft
- Pitch Match:Match pinion and spur gear pitch; 48P
- Material:Hardened steel
- RC Applications:1/10-scale cars, trucks, and off-road models
- Additional Feature:Five M3 screws
- Additional Feature:Hex wrench included
- Additional Feature:Off-road vehicle use
Hardened Steel RC Pinion Gear Set (13T–16T)
JIECHUN’s hardened steel pinions deliver durable 5 mm-shaft performance for 1/8- and 1/10-scale RC drivers. This black four-gear set gives you 13T, 14T, 15T, and 16T options for tuning your truck or buggy, including compatible Traxxas, Axial, HSP, and Redcat models.
Before installation, check your spur gear’s pitch and material. These pinions pair with steel spur gears, but aren’t compatible with hardened plastic or aluminum spurs. The package includes four grub screws and an L-shaped Allen wrench, so you have the basic hardware and tool for fitting your chosen gear. Confirm shaft diameter and spur compatibility before you buy to avoid mismatches and protect your drivetrain during operation.
- Gear Type:RC pinion gear set
- Tooth Counts:13T–16T
- Shaft Fit:5 mm motor shaft
- Material:Hardened steel
- RC Applications:1/8- and 1/10-scale vehicles, including trucks and buggies
- Additional Feature:Four-gear set
- Additional Feature:L-shaped Allen wrench
- Additional Feature:Steel spur gears only
Factors to Consider When Choosing RC Pinion Gears
When choosing an RC pinion gear, match its pitch and shaft bore to your motor and spur gear. Consider tooth count and material to balance speed, torque, and durability. Check vehicle compatibility to confirm the gear fits your setup.
Gear Pitch
Gear Pitch
Gear pitch determines the spacing and size of a pinion’s teeth, so you’ll need to match it to your spur gear for proper meshing. Common RC pinion pitches include 48P, 32P, and 0.8M. Before you choose a pinion, check the pitch marked on your spur gear. Both gears must use matching pitches so their teeth mesh correctly. A 32P gear is also called 32DP and is approximately equivalent to 0.8M module.
Don’t assume that different pitch markings will fit together just because the pinion and spur have the same number of teeth. Their tooth spacing may not align, which can cause poor meshing and damage your gears. Matching the pitch helps you avoid excessive wear and keeps your drivetrain working reliably under load during operation.
Shaft Bore
Shaft Bore
The pinion’s shaft bore must match your motor shaft’s diameter. Check the shaft measurement before you buy, then choose a pinion with the same bore. For example, a 3.175 mm bore fits a 3.175 mm shaft, while a 5 mm bore fits a 5 mm shaft. A 1/8-inch shaft measures approximately 3.175 mm, but it isn’t interchangeable with a 5 mm shaft.
If the bore’s too small, the pinion won’t slide onto the shaft. If it’s too large, the gear may not clamp securely or run concentrically, which can cause vibration and wear. Once you’ve confirmed the fit, fasten the pinion with its set screw, also called a grub screw, and tighten it securely. Bore diameter is distinct from gear pitch, so confirm both specifications.
Tooth Count
Once the bore fits your motor shaft, consider tooth count: it changes the gear ratio and affects how your RC vehicle performs.
Tooth count means the number of teeth on the pinion. Choose more teeth for higher speed, but expect less torque and greater motor load. A smaller count generally adds torque and can aid acceleration or climbing, though you may lose speed.
Sets often offer options such as 13T to 17T or 19T to 23T, letting you tune gearing to driving conditions. Don’t assume the highest count is best; monitor motor and ESC temperatures during realistic runs to avoid overheating. If either gets too hot, try a lower count to reduce strain. Match gearing to the performance you need, then reassess temperatures before settling on your final setup.
Gear Material
If you want a pinion that stands up to repeated use, hardened steel offers strength and wear resistance, helping preserve tooth shape under load.
Steel gears can resist deformation when you apply power, so their teeth retain a consistent profile and mesh reliably over time. This durability makes steel a practical choice when you need a pinion to handle frequent running.
However, don’t choose by pinion material alone. Consider what your spur gear is made from: a hard steel pinion may wear or damage a plastic or aluminum spur. A durable metal gear can last a long time, but the surrounding gear still matters. Check the gear pitch, too. Your pinion and spur need matching tooth spacing to mesh properly; mismatched pitches can cause poor engagement and accelerated wear. Weigh strength against the spur’s material and construction, then inspect both gears periodically for visible wear or damage.
Vehicle Compatibility
Before choosing a pinion, check that it fits your motor and vehicle.
Check your motor shaft diameter first; common sizes include 3.175 mm (1/8 inch), 5 mm, and 2 mm. The pinion’s bore must match that shaft, or you may not get a secure fit or reliable power transfer. Match the pinion’s pitch to your spur gear, since different pitches won’t mesh correctly.
Also confirm the gear suits your vehicle’s scale and type, whether you’re choosing for a 1/10-scale car or a 1/24-scale crawler. Finally, consider the spur gear’s material. Some hardened steel pinions are designed to run with steel spur gears, so don’t assume every pinion works with every drivetrain. Checking these details before you buy helps you select a compatible gear and avoid poor engagement.
Installation Accessories
Check the installation accessories before buying a pinion. You’ll need a tool that fits the gear’s set screw, so confirm whether the package includes a hex key or screwdriver. Don’t assume every wrench works: some kits provide a 2 mm hex wrench, while others list only a hex key, leaving the size unclear. Verify the required size before installation.
Also check that each pinion comes with a set screw or grub screw to secure it to your motor shaft. Make sure the screw suits your gear and shaft arrangement; for example, one set includes M4 set screws. Keep the tool and spare screws together. You’ll then be ready to remove or replace the pinion when you change gear ratios, without searching for hardware.
Frequently Asked Questions
How Often Should RC Pinion Gears Be Cleaned?
Clean your RC pinion gears after every few runs, and inspect them before each session. If you drive in dust, mud, or wet conditions, clean them immediately afterward to prevent grit and corrosion.
What Lubricant Is Safe for RC Pinion Gears?
You don’t usually need lubricant on RC pinion gears; keep them clean and dry to prevent grit buildup. If the manufacturer recommends it, apply a tiny amount of plastic-safe dry PTFE lubricant, never grease or oil.
How Can I Tell When a Pinion Gear Needs Replacing?
Replace your pinion when you see rounded, chipped, or missing teeth, hear grinding, or notice slipping under throttle. Check for metal debris, play, and poor gear mesh; don’t confuse normal backlash with wear.
Can a Damaged Pinion Gear Harm the Motor?
Yes, a damaged pinion can harm your motor: it’ll cause excessive vibration, added load, overheating, and premature wear. Stop running your RC car, inspect the gear mesh, and replace damaged parts before you drive again.
Should I Remove the Pinion Gear Before Storing My RC Car?
You usually don’t need to remove the pinion gear before storing your RC car. Clean and dry the drivetrain, check for damage, and keep the car somewhere cool, dry, and dust-free to avoid unnecessary wear.
Conclusion
Choose the pinion gear that matches your motor shaft, spur-gear pitch, and vehicle’s needs. A higher tooth count can increase speed, while a lower count can improve acceleration and reduce motor strain.
Check each gear’s material and fit before buying, and use the right tools to secure it. With the right match, you’ll get smoother power delivery and help protect your drivetrain. Start with your manufacturer’s recommendations, then adjust gearing carefully to suit your driving style.





















